HyperX 2 x 8GB (2666MHz) DDR4

HyperX, 2 x 8GB (2666MHz), DDR4 SDRAM, God Taget fra manualen :) https://www.kingston.com/dataSheets/HX426C16FB2K2_16.pdf HyperX HX426C16FB2K2/16 is a kit of two 1G x 64-bit (8GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total kit capacity is 16GB. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows: JEDEC/XMP TIMING PARAMETERS • JEDEC/PnP: DDR4-2666 CL16-18-18 @1.2V • XMP Profile #1: DDR4-2666 CL16-18-18 @1.2V *Power will vary depending on the SDRAM used. FEATURES • Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP - 2.5V Typical • VDDSPD = 2.25V to 3.6V • On-Die termination (ODT) • 16 internal banks; 4 groups of 4 banks each • Bi-Directional Differential Data Strobe • 8 bit pre-fetch • Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop) • Height 1.340” (34.04mm), w/heatsink Note: The PnP fea