WD Red 4TB NAS hårddisk

Western Digital Red 4TB NAS SATA hårddisk 5400rpm. Har suttit i en stationär server.

Smartctl data för den som vill veta detaljer och drivens hälsa (den har legat oanvänd i väntan på försäljning sedan februari som synes):

smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-94-generic] (local build)

Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===

Model Family: Western Digital Red

Device Model: WDC WD40EFRX-68N32N0

Serial Number: WD-WCC7K3DJC61Y

LU WWN Device Id: 5 0014ee 2ba7dfa06

Firmware Version: 82.00A82

User Capacity: 4?000?787?030?016 bytes [4,00 TB]

Sector Sizes: 512 bytes logical, 4096 bytes physical

Rotation Rate: 5400 rpm

Form Factor: 3.5 inches

Device is: In smartctl database [for details use: -P show]

ATA Version is: ACS-3 T13/2161-D revision 5

SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)

Local Time is: Mon Feb 19 11:30:52 2024 CET

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

General SMART Values:

Offline data collection status: (0x00) Offline data collection activity

was never started.

Auto Offline Data Collection: Disabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: (44640) seconds.

Offline data collection

capabilities: (0x7b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine

recommended polling time: ( 2) minutes.

Extended self-test routine

recommended polling time: ( 473) minutes.

Conveyance self-test routine

recommended polling time: ( 5) minutes.

SCT capabilities: (0x303d) SCT Status supported.

SCT Error Recovery Control supported.

SCT Feature Control supported.

SCT Data Table supported.

SMART Attributes Data Structure revision number: 16

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0

3 Spin_Up_Time 0x0027 160 152 021 Pre-fail Always - 6966

4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 20

5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0

7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0

9 Power_On_Hours 0x0032 059 059 000 Old_age Always - 29939

10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0

11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0

12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 20

192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 8

193 Load_Cycle_Count 0x0032 194 194 000 Old_age Always - 18800

194 Temperature_Celsius 0x0022 118 109 000 Old_age Always - 32

196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0

197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0

198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0

199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0

200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0

SMART Error Log Version: 1

No Errors Logged

SMART Self-test log structure revision number 1

No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.