PA System with Yorkville YS-115 speakers, QSC USA 850 amplifier and LD Systems LAX-12D mixer

PA Komplet og velspillende sanganlæg inkl kabler QSC - USA 850 Power Specifications Output Power, typical (per channel): Continuous Average Output Power Both Channels Driven: 8 ohms, 1kHz, 1% THD: 255 watts 4 ohms, 1kHz, 1% THD: 425 watts 2 ohms, 1kHz, 1% THD: 520 watts Continuous Average Output Power Bridge Mono Operation: 16 ohms, 1kHz, 1% THD: 510 watts 8 ohms, 1kHz, 1% THD: 850 watts General Specifications Voltage Gain (dB): 32 Sensitivity (for rated power @ 8 ohms): 1.16 Vrms Distortion: SMPTE-IM, Less than 0.05% Dynamic Headroom: 2dB at 8 ohms Frequency Response: 20Hz to 20kHz, +0/-1dB, 1 watt Damping Factor: Greater than 200 Noise: 104dB below rated output (A weighted) High Pass Filter Settings: 30Hz, 50Hz, out Input Impedance: 20k ohms balanced and 10k unbalanced Controls: Front: AC Switch. AC Circuit Breaker. Back: Stereo/Bridge Switch. Ch.1 and Ch.2 Gain Knobs. 8 Position DIP Switch for Filter and Limiter. Indicators: PWR-ON: Green LED. CLIP: Red LED. Connectors (each channel): Input: Barrier Strip and Neutrik "Combo" 1/4" TRS and XLR, tip positive. Output: "Touch proof" binding posts. Cooling: Two-speed fan, rear-to-front air flow. Amplifier Protection: Full short circuit protection, thermal, open circuit, ultrasonic, and RF protection. Stable into reactive or mismatched loads. Load Protection: On/off muting. DC-fault protection. Output Circuit Type: Class AB complimentary linear outputs. Power Requirements: 120, 240 VAC, 50-60Hz Dimensions: Faceplate Width: Standard 19" (48.3cm) Rack Mounting. Faceplate Height: 5.25"(13.3cm). Chassis Depth: 9.5" (24.1cm) Weight: Shipping (lbs/kg): 37/16.8 Net (lbs/kg): 34/15.4 Yorkville YS-115 200 Watt 1x15 Speaker w/Horn LD Systems LAX-12D USB 12-channel Mixer With Digital Effects https://www.gear4music.dk/da/PA-DJ-and-belysning/DISC-LD-Systems-LAX-12D-USB-12-channel-Mixer-With-Digital-Effects/EP1 Stativer medfølger ikke, men kan tilkøbes for +400kr